An independent, third-party certification body · operating to ISO/IEC 17021-1:2015
Verify a Certificate ↗·Global · Remote & on-site·EN
Certification
Apply →
Certification
Home/Certification Process
The certification lifecycle

The certification
process

From application to recertification — one defined path, delivered under ISO/IEC 17021-1, with the certification decision held independent of the audit team at every stage.

Basis · ISO/IEC 17021-1 Remote · IAF MD4 Multi-site · IAF MD1 3-year cycle
Apply for Certification → Verify a Certificate
CYCLE 3-YR
How certification works

A single, transparent path — for every applicant

Certification is not a purchase; it is an independent assessment of conformity. Every organisation we certify follows the same defined process, is audited against the same published requirements, and is judged on the same basis: the evidence gathered during the audit.

The audit team gathers and records that evidence. A separate, competent decision-maker — who did not conduct your audit — reviews it and decides whether certification is granted. That separation is required by ISO/IEC 17021-1 and is what gives a Skyeblanc certificate its meaning.

Below is the full lifecycle we make public, as required by Clause 8: initial certification, the three-year cycle, and every process for maintaining, changing, suspending or withdrawing a certificate.

Initial certification

From application to certificate

Six stages take a new applicant from first contact to an issued certificate. Stage 1 and Stage 2 are the on-site or ICT-assisted audits; the decision that follows is made independently.

1

Application & review

You tell us the standard, your scope of activities, employee numbers (including shifts and part-time), sites and locations, and any existing certification. We review the application to confirm we are competent to audit your scope, and that no impartiality conflict exists.

Application reviewImpartiality screening
2

Contract & audit programme

We calculate audit duration per IAF MD5 and return a fixed-fee quotation and a programme for the full three-year cycle. Once agreed, a certification agreement sets out the rights and obligations of both parties before any audit begins.

Duration · IAF MD5Certification agreement
3

Stage 1 audit

A readiness review of your documented management system, scope, objectives and internal audits. Stage 1 confirms you are ready for Stage 2, identifies areas of concern, and finalises the Stage 2 plan. It may be conducted on-site or remotely.

Readiness review
4

Stage 2 audit

The main assessment: your management system audited in operation against every requirement of the standard, across your defined scope and sites. The audit team gathers objective evidence and records any findings — from observations to nonconformities.

Conformity assessmentDelivery · IAF MD4
5

Independent certification decision

The complete audit record is reviewed by a competent decision-maker who took no part in the audit. Certification is granted only where the evidence supports conformity. Where it does not, certification is refused or deferred pending resolution of nonconformities — and the reasons are given.

Independent decisionGrant · refuse · defer
6

Certificate issued & published

On a positive decision we issue your certificate, stating the certified scope, sites and standard. The certificate is added to our public directory for verification, and — once the scheme is accredited — published to IAF CertSearch.

Public verificationIAF CertSearch
Maintaining conformity

The three-year certification cycle

Certification is not a one-off event. It is maintained across a three-year cycle of surveillance, then renewed by a full recertification audit.

Year 0

Initial audit

Stage 1 & Stage 2, independent decision, certificate issued.

Year 1

Surveillance

First surveillance audit confirms the system remains effective and conforming.

Year 2

Surveillance

Second surveillance audit — continued conformity and improvement checked.

Year 3

Recertification

A full recertification audit renews the certificate for a further cycle.

Surveillance audits are planned so the whole management system is audited across the cycle. A lapse or a missed surveillance audit can lead to suspension.

Lifecycle decisions

Granting, maintaining and withdrawing certification

Every decision that can be taken over the life of a certificate — each made against defined criteria, each open to appeal.

Granting

Certification is granted when the independent decision-maker is satisfied the evidence demonstrates conformity across the certified scope.

Initial & recertification

Refusing

Where evidence does not support conformity and nonconformities are not resolved, certification is refused or deferred — with the reasons stated.

Reasons provided

Maintaining

Certification is maintained through the planned surveillance programme, provided the system continues to conform and findings are addressed.

Annual surveillance

Renewing

Recertification at year three, via a full audit, renews the certificate for another three-year cycle without a break in validity.

Every 3 years

Suspending

Certification may be suspended — for example after a serious unresolved nonconformity, a missed surveillance audit, or misuse of marks. Suspension is temporary and time-limited.

Temporary

Restoring

A suspended certificate is restored once the issue that caused the suspension is resolved and verified within the permitted period.

On verified resolution

Withdrawing

Where a suspension is not resolved in time, or a client no longer meets the requirements, certification is withdrawn and removed from the public directory.

Removed from directory

Expanding scope

Adding sites, activities or standards to a live certificate is assessed by an audit sized to the extension before the scope is amended.

Scope extension audit

Reducing scope

Scope is reduced where part of a system no longer conforms or is discontinued — the certificate is reissued to reflect the true certified scope.

Certificate reissued
Changes & special audits

Transfers, short-notice audits and scope changes

Situations that fall outside the routine cycle — each handled to a defined rule.

Transfer of certification

If you hold a valid, accredited certificate from another certification body, you can transfer it to Skyeblanc Certification. We review your current certification, audit history and any open nonconformities before accepting the transfer.

Transfer · IAF MD2

Short-notice & special audits

We may conduct audits at short notice — for example to investigate a complaint, examine a certified client after a significant change, or follow up on a suspension. The grounds are defined in the certification agreement.

Investigations & follow-up

Changes to your organisation

Certified clients must notify us of changes that affect certification — legal status, ownership, structure, key personnel, sites, or the management system itself — so we can assess the impact on the certified scope.

Client obligation to notify

Appeals against a decision

Any certification decision can be appealed. Appeals are handled by people who were not involved in the decision being appealed, and never disadvantage the appellant.

Complaints & Appeals →
How we deliver

Audited globally — on-site and remotely

Remote & ICT-assisted auditing

Where appropriate to the risk, audits may be delivered remotely using information and communication technology — document review, live video assessment and interviews. The mix of on-site and remote is decided by risk, never by convenience, and conforms to IAF MD4.

Remote auditing · IAF MD4

Multi-site organisations

For organisations operating across multiple sites under one management system, audits use a sampling approach: a representative selection of sites is audited each cycle so that, over time, the whole network is covered. Sampling conforms to IAF MD1.

Multi-site sampling · IAF MD1
Begin certification

Ready to start the process?

Tell us your scope, sites and employee numbers, and we'll return a fixed-fee audit quotation with the full three-year programme and timeline.

Apply for Certification →
Prefer pricing first? Request an audit quotation →
No consultancy is offered or implied — Skyeblanc Certification audits and certifies only.